How to clean a phone case
Take the phone out, wipe the case with warm soapy water and a soft cloth, then let it dry fully. Plus clear and silicone cases, disinfecting, and what to avoid.
To clean a phone case, take your phone out, then wipe the case inside and out with a soft cloth dampened with warm water and a drop of mild washing-up liquid (dish soap). Use a soft toothbrush for the corners and cut-outs, wipe again with a cloth dampened with plain water, and let the case dry completely before you put your phone back in. That works for most plastic, silicone and printed cases. The sections below cover clear cases, silicone, disinfecting and what to avoid.
What you need
- Two soft, lint-free cloths (microfibre is ideal)
- A small bowl of warm water with a drop of mild washing-up liquid
- A soft toothbrush you only use for cleaning
- Cotton buds for the camera cut-out and button holes
- Baking soda, for clear cases with stubborn marks
How to clean a phone case, step by step
- Take the phone out of the case. Never clean a case with the phone inside: water collects around the edges and can get into the ports and buttons. Remove any cards from a wallet case too.
- Shake out and brush off dust. A dry toothbrush clears grit from the corners, which stops it scratching the case when you wipe.
- Wipe with soapy water. Dip a cloth in the soapy water, wring it out well and wipe the outside, the inside and the edges. You want the cloth damp, not dripping.
- Scrub the details. Dip the toothbrush in the soapy water and work gently around the camera surround, button covers and port openings. Use a cotton bud where the brush won't reach.
- Rinse. Wipe the case again with a second cloth dampened with plain water to remove any soap.
- Dry it fully. Pat it dry with a microfibre cloth and leave it to air-dry, especially inside the corners, before the phone goes back in. Trapped moisture between case and phone is what you are trying to avoid.
Printed, gloss and matte cases
Printed hard cases, like ours, clean well with the method above. Treat the printed surface gently: wipe, don't scour.
- Gloss: fingerprints show more on a gloss finish. A dry microfibre cloth removes most of them between washes.
- Matte: hides fingerprints well, but heavy rubbing or abrasive products can polish small patches shiny. Use light pressure and skip melamine sponges (magic erasers), which work by abrasion.
For everyday cleaning, stick to soap and water. Solvents and strong cleaning sprays can dull a printed finish over time.
How to clean a clear phone case
Start with the soapy water method. Clear cases show every mark, so the soft toothbrush makes the most difference here, especially along the inside edges where dirt builds up.
For grey marks that soap doesn't shift, mix a little baking soda with a few drops of water into a paste. Rub it gently over the marks with the toothbrush, then rinse the case under the tap and dry it. Baking soda is a mild abrasive, so use it occasionally and not on printed or matte surfaces.
Why clear cases turn yellow
Most clear cases are made from TPU, a flexible plastic. Over time, UV light breaks down the plastic and gives it a yellow tint, and heat and contact with skin speed it up. This is a change in the material itself, so cleaning removes the dirt on top but won't bring back the original colour. Some clear cases include UV-resistant additives that slow it down.
You will find online hacks that use bleach or hydrogen peroxide to whiten a yellowed case. We would skip them: they can damage the plastic, and Apple specifically lists hydrogen peroxide among the things not to use on its cases. Once a clear case has yellowed, replacing it is the realistic fix.
How to clean a silicone case
Apple's advice for its own silicone cases is to take the phone out and wipe the case with a soft, slightly damp, lint-free cloth. For more grime, use the soapy water method and rinse thoroughly, as soap left behind attracts more dust. Silicone picks up lint from pockets and bags, so a lint roller or a strip of tape is a quick fix between cleans.
How to disinfect a phone case
Soap and water removes most germs along with the dirt. If you want to disinfect a hard plastic case as well, wipe it with a 70% isopropyl alcohol wipe, let it air-dry and then put it back on. Do this occasionally and not as part of every clean, and avoid soaking printed, soft-touch or leather surfaces in alcohol.
While the case is off, clean the phone too. Apple says you can use a 70% isopropyl alcohol wipe or a 75% ethyl alcohol wipe on the hard, non-porous surfaces of an iPhone, such as the screen and back. Keep moisture out of the openings, don't spray anything directly onto the phone, and don't use bleach.
What not to use on a phone case
Apple lists the following as things to avoid on its cases, and it is sensible advice for any case:
- Window or household cleaners and aerosol sprays
- Solvents, ammonia and abrasives
- Hydrogen peroxide
Also avoid bleach, the dishwasher, washing machine and hot water. Heat can warp a case so it no longer fits snugly. Don't submerge a case with magnets or a wallet pocket.
How often to clean your case
A quick wipe with a dry microfibre cloth every few days keeps fingerprints and dust under control. We would give it the full soap-and-water clean every couple of weeks, or straight away after sunscreen, make-up or food gets on it, as oils and pigments are easier to remove before they set.
When to replace a case instead
Cleaning won't fix a case that has stopped protecting the phone. Replace it if:
- the corners are cracked or split, or the case has deep gouges after a drop
- it has stretched and no longer grips the phone firmly
- a clear case has turned yellow
- the raised edge around the camera or screen has worn down
If you are choosing a new one, our guide to the different types of phone case explains the difference between Tough, MagSafe and slim cases, and you can browse all our phone cases by model.